Home
Clinical Management
Use Clinical to record your consultations with a patient and their clinical details.
Tools
Diagnostic Devices
ECG Monitors
Vectraplex ECG
Installing and Configuring the Software

Clinical Management
Use Clinical to record your consultations with a patient and their clinical details.
- Actions
  An Action is a record of something that was done or is to be done for a patient.
- Progress Notes
  Record notes about a patient's visit in Progress Notes.
- Prescribing
  Use Prescribing to prescribe medications to your patient, conforming with all requirements and regulations.
- Examinations
- Recalls
  A recall is a type of flag recorded against a patient's record to inform practitioners or practice staff of when a patient is due to return to the practice, usually so that some clinical procedure can be performed.
- Patient's Medical History
  History includes a patient's medical conditions, both active and inactive.
- Investigations
- Immunisations
  Use the Imm. tab to manage a patient's immunisations.
- Preventive Health
  The Preventive Health module provides assistance in identifying and preventing issues and potential problems by making suggestions or recommending actions.
- Assessments
- Cervical Screening
- Obstetrics Module
- Diabetes Module
- Summaries
  Clinical provides formatted summaries which can be printed for patients.
- Measurements
  The Clinical measurements window displays the history of a patient's various clinical measurements.
- MedicalDirector Care
  Create Care Plans in MedicalDirector.
- Telehealth
  Consult with patients remotely.
- Honeysuckle Health Private Health Insurance Checker
- Tools
  - Tool Box
    The Tool Box is a suite of tools for recording patient readings, either calculated manually or via a Diagnostic Device.
  - Calculators
  - Diagnostic Devices
    - Blood Glucose Monitors
    - Blood Pressure Monitors
    - ECG Monitors
      - Biolog CV3000
      - Cardioline Cube
      - Cardioline Delta
      - CardioPerfect Pro
      - ECG MAC PC-ECG PE1201
      - EDAN SE-1515 PC ECG
      - Fukuda Autocardiner
        The Fukuda Autocardiner device is no longer supported by Clinical.
      - Macquarie CT200
      - Nihon Kohden
      - Norav PC-ECG
      - QRS Universal ECG
      - Vectraplex ECG
        Installing and Configuring the Software
        Testing the Vectraplex ECG in Clinical
    - Spirometers
    - Dermatology
    - Troubleshooting for Diagnostic Devices
      First steps to troubleshoot a diagnostic device that is not working as expected.
- Surgical Audit Tool
  Use the Surgical Audit Tool to record information about surgical procedures.

Installing and Configuring the Software

Before you begin

Ensure you have the VectraCor software.
Ensure you have the VIS interface software.
Ensure you have your computer's IP Address. Please contact your IT Support if you need assistance to obtain this number.
Ensure you have created a folder called Vectraplex in your Public Documents folder.

Procedure

Install the VectraCor software. This software requires no configuration.
Install the VIS interface software. This software requires some configuration as explained following.
Open the VIS software.
Select the Configuration menu. The default password for accessing is VectrCor.
Configure the following as indicated in the image below:
- Set the Protocol to GDT.
- Set the EMR to Medical Director. You will be prompted as to whether you wish to also enable PDF transfer. Click Yes to this prompt. This is required for importing the PDF output files into MedicalDirector Clinical.
Within the Folder Creation Location browse to the Vectraplex folder you created.
Manually create any missing folders. You should have the following:
Within the Request File Path location, browse to and select C:\Users\Public\Documents\Vectraplex\Medical Director GDT.
Within the Domain/IP Address section, enter the IP Address you obtained earlier.
Located the PDF Output Path section. Within here, browser to and select the PDF Output path your created at Step 7.
- Note that this path can alternatively be a UNC path, but it is recommended you use a local path.
Click Save to complete the configuration.
Close the VIS software selecting No to close all services
You can now record an ECG via the Clinical ToolBox