Fukuda SpiroAnalyzer ST-75/95 Spirometer

Procedure

  1. You should see the Main menu. If you do not, switch off the device and then switch it back on.
  2. From the Main menu, select 2 (MEM).
  3. From the MEM menu, select 3 (DEL).
  4. From the DELETE menu, select 2 (ALL).
  5. Press the ENTER button to confirm. You are returned to the MEM Menu.
  6. Press the ESC button to return to the Main menu.
  7. From the Main menu, select 1 (ID) to enter a new patient record.
  8. When prompted, press the ENTER button to save the current record. You are presented with a new patient record.
  9. Enter new patient data into this record from the Clinical Record From Fukuda window that should still be open on your computer. Whilst entering data, you can move to each new line by pressing the ENTER button on the device.
  10. Once you have entered the patient's data correctly, press the Fn button. You are returned to the main menu.
  11. Initiate the Pre Test, by pressing the 7 (FVC) button on the device. You are presented with the FVC DATA window.
  12. Press the ENTER button to conduct the Pre Test.
  13. Once the test is complete (a graph of the results will be visible) either,
    • Press the STOP button to return to the FVC DATA window. This allows you to save the first test and conduct two further Pre Tests, or
    • Do nothing. After a brief pause, the test is deleted and you are returned to the FVC DATA window where you can begin the tests again.
  14. To conduct a Post Test, you must place the device into Post-mode. To do this, press the 4 (POST) button. Then press the ENTER button to confirm. You are returned to the Main menu.
  15. Conduct the Post tests by following the same instructions contained in steps 11 though 14.
  16. To transfer the data back to the spirometer software (and MedicalDirector Clinical) press the 3 (UTL) button.
  17. From the UTL window, select 3 (Transmission).
  18. From the Transmission window, select 2 (WTX). On your computer, the Receiving from ST-75/95 window is displayed, and you will see the data transfer taking place.
  19. The Register Confirmation window is displayed. Click on Execute button to confirm.
  20. Exit the spirometer software.
  21. In Clinical, close the Record From Fukuda window. Data should be transferred to Clinical, confirmed by the Spirometry Results window that is displayed. Close this window. The results are displayed in the Respiratory tab in Clinical.

    Using the Graph View:

    • Click Graph to display the patient's record in graph format. Use the scroll bar to view different sections of the graph.
    • Click Print to print the sections of the graph displayed on the screen.
    • Click Close to close the Graph window and return to patient's Clinical window.

Results