| Issue: |
When closing the Cube software, you receive the message, 'Unable to obtain the GDT data. Ensure GDT is enabled within the Cardioline Cube software and the path is accessible'. |
|
Ensure that you have specified a working directory for Monitor ECG and ECG. |
|
| Issue: |
After conducting the scan within the Cube software and clicking the End button, you receive the following message: 'TCubeEcgViewerApi.SaveNewExam : only duration=10s is supported for types other than MonitorECG (E:\luntbuild\work\Cube\dev5\_SRC\prjCube\viewerEms\src\uEcgViewerApiImplementation.PAS, line 4478)' |
|
Ensure that at least 10 seconds have elapsed before ending the scan in the Cube software. |
|
| Issue: |
Clinical appears to be frozen and will not accept user input. |
|
Ensure that the scan in the Cube software has been finalised and that the Cube software has been closed before returning to Clinical. |
|
| Issue: |
After pressing the 'Record' button in MedicalDirector Clinical, you receive the following message : 'GDT Error: GDT patient differs from patient in database' |
|
The patient ID already exists in the CARDIOLINE Cube database. This is more likely to occur if you have already conducted scans for this patient in the Cube software external to Clinical. |
|
| Issue: |
After pressing the 'End' button during a test, you receive the following message: 'The exam has not been finished correctly and it will be deleted'. |
|
This message will occur if you select 'No' when prompted to save the test after pressing 'End'. |
